In the realm of electrical maintenance and troubleshooting, having reliable tools at your disposal can make all the difference. The BSIDE AVD06 Test Pen is a groundbreaking addition to the toolkit of electricians and maintenance professionals, offering a wealth of intelligent features designed to simplify and enhance the process of detecting line breakpoints and voltage anomalies. In this blog post, we’ll delve into the unique capabilities of the AVD06 Test Pen, exploring its versatile modes, advanced detection capabilities, and user-friendly design.
1.Turn on/off.
Turn on: rotate switch and sensitivity adjustment knob, sensitivity automatic mode indicator light and signal strength indicator light (high, medium and low), blink once, start up by default as sensitivity automatic mode, mode indicator light and power indicator light are always on.
Turn OFF: turn the knob to OFF when the tester is on, the power indicator light is OFF.
2.Automatic/manual mode selection.
The default setting is automatic, but the range of the voltage range is approximately 48-1000v, and by pressing the MODE key, you can switch to the manual adjusting MODE, the sensitive auto-mode indicator is out, and by the manual spinning switch and the sensitivity adjusting the knob to adjust the sensitivity, the voltage is set to the highest and the voltage range is approximately 12 to 1000 v. Press the MODE key again to return to auto MODE
3.Turn on/off spotlight
Turn on the spotlight: in the test on state, press the key of the flashlight and turn on the torch.
Turn the spotlight off: under the on condition of the spotlight, press the key of the spotlight and turn off the spotlight. If the flashlight is not turned off, it will be off in about 3 minutes.
4.Ac voltage detection
Put the sensor head into the power outlet or near the electrified lead wire, and when the tester detects the ac voltage signal, the voltage signal flicks the signal, and the test is based on the intensity of the signal detected, lighting the corresponding signal strength indicator lights (high, medium, low), and the buzzer emits different frequencies of alarm sound. When the ac voltage signal is sensed, the green signal intensity indicator (low) is lit. When the high ac voltage signal is sensed, the yellow signal intensity indicator light (middle) is lit; When the highest ac voltage signal is sensed, the red signal strength indicator light (high) is lit.
- Neutral wire/live wire check
Separate the two wires to be detected as far as possible, and push the inductive head of the tester close to the wire, and plug the probe into the jack, and the tester detects that one of the strong induced signal is live wire, and the weak or non-sensing signal of the induction signal is neutral wire.
6.Automatic shutdown function.
When the tester does not operate within about 5 minutes and does not detect the voltage signal, the tester will shut down automatically, and after automatic shutdown, press the MODE button to wake up.
7.Battery undervoltage indication.
When the battery voltage is below about 6.5v, the power indicator light will flash for 3 times, and the buzzer will turn off automatically after a sound. Please replace the battery in time, press the MODE key once after the battery is changed, if the switch knob is in the power-on position, then turn on the machine; otherwise, turn the switch knob to the startup position, and then start the machine.
8.Battery replacement
Open the battery cover.
Remove the old battery.
Load the new battery according to the positive and negative battery.
Warning: in order to avoid shock, the tester should not be used before it is buckled in place.
The BSIDE AVD06 Test Pen is a game-changer for electricians and maintenance professionals seeking a reliable and intelligent tool for line breakpoint detection, voltage sensing, and wire differentiation. With its user-friendly interface, advanced features such as sensitivity adjustment, AC voltage detection, and a built-in spotlight, the AVD06 takes electrical testing to a new level of convenience and efficiency. Whether you’re troubleshooting circuits, performing routine maintenance, or working on complex electrical installations, the AVD06 Test Pen proves to be an indispensable companion that enhances your productivity and confidence in every task. Upgrade your electrical toolkit today with the BSIDE AVD06 and experience the future of intelligent testing.
